Product description
Adopting professional imported material, especially the super propellant, this product can effectively and thoroughly remove greasy dirt, gum and carbon deposits inside and outside of the carburettor and choke without disassembling them. It can effectively improve the engine performance, horsepower and combustion effectively, helping save oil and decreasing the gas pollution. It is harmless to binary catalytic cracker and oxygen sensor. Take down the air filter on the carburettor, start the engine, keep it rub at a idle speed; shake this product fully and then set the injection pipe on the fuel injector, spray some of the liquids (about 1/3) in the float chamber through balance hole, thus clean the orifice and oil away; spray some of the liquidizes (about 1/3) in the choke and inner wall of carburettor to clean sludge and colloid. It is suggested that the carburettor be maintained or cared per 6000.km. Avoid breaking caused by exposure in the sunshine in a high temperature for a long time. Don’t puncture incinerate the container. Stored it at a temperature lower than 40C. avoid contacting with the eyes. Apply it a well-ventilated place. If contact with eyes accidentally, wash the eye with the clean water for 15 minutes. Keep out of the reach of children. Can consideration: put the used upside down into a cartoon or over the piece of newspaper, press the sprayer for 2 min to discharge the remaining liquid. In certain circumstances, open the top cap and cleared it up. don’t place it in the car.
High Quality Product, ISO 9001 and UKAS Accredited
Shines and Feel Fresh
Excellent for all cars
Feel very Easy to Use
